Sscg180-1000-7000 Gasoline Engine Electric Dynamometer Test Bench

• Customization: Available
• After-sales Service: Provided
• Warranty: One Year
• Model NO.: SSCG180-1000-7000
• Max Diameter of Workpiece: 1200mm
• Mass Scope of Workpiece: 1000kg
• Type: Power Test Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.2%Fs
• Load Way: Mechanical Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 500-1000Kg
• Power Source: AC380V
• Oil Cylinder Position: No
• Rated Power: 180kw
• Rated Speed: 1000rpm
• Data Sampling Rate: 10kHz
• Rated Torque: 600n·m
• Maximum Speed: 7000rpm
• Speed Control Accuracy: ±1rpm
• Protection Level: IP54
• Torque Measurement Accuracy: ±0.2%Fs
• Transport Package: Seaworthy Plywood
• Specification: Customized
• Trademark: Seelong
• Origin: China
• HS Code: 9031200090
• Production Capacity: 25 Sets /Year
• Package Size: 230.00cm * 180.00cm * 220.00cm
• Package Gross Weight: 1000.000kg

Product Description

SSCG180-1000-7000 Gasoline Engine Electric Dynamometer Test Bench

Product Description

This test bench was developed specifically for 180-kilowatt gasoline engines. With "electric loading - precise measurement and control - condition simulation" as its technical core, it follows standards such as GB/T 18297 and GB19055. Furthermore, it can conduct full-condition tests on engine power performance, economy and emission characteristics. Dynamic load simulation is achieved through an electric dynamometer, and more than 50 parameters are collected synchronously in conjunction with a high-precision sensing system. It is suitable for scenarios such as passenger car engine development, hybrid system matching, and component verification. The modular design supports engine testing of different technical routes such as turbocharging and direct injection.

 

Technical specification

Rated power	180kW	Digital signal channel	8 in and 8 out
Rated speed	1000rpm	Temperature channel	24 channels
Rated torque	600N·m	Analog channel	16 channels
Rated frequency	80Hz	Storage temperature range	-40 ° C to +60 ° C
Maximum speed	7000rpm	Operating temperature range	-40 ° C to +60 ° C
Input voltage	380V/50Hz	Ambient humidity	40% - 60%
Model	SSCG180-1000-7000	Speed control accuracy	±1rpm
Data sampling rate	10kHz	Torque measurement accuracy	±0.2%FS
Protection level	IP54
Can be customized

Engine Test Bench Components

SSCG180-1000-7000 Gasoline Engine Electric Dynamometer Test Bench Components

1. Electric dynamometer and loading system
•
Water-cooled AC asynchronous motor: Rated power 180kW, speed range 1000-7000rpm, maximum loading torque 600N · m, 0-100% load step response ≤0.4s.
•
Torque-speed measurement: JN338-A sensor (range 0-800N · m, resolution 0.1N · m) with 1024 line encoder (speed accuracy ±0.05%). 

2. Fuel and intake measurement and control system
•
Fuel supply module: high-pressure oil pump (0 - 12MPa), fuel constant temperature control (accuracy ±1 ° C).
•
Intake system: Hot film flowmeter (0-2000kg/h, accuracy ±0.5%), electric heating preheater (-20 ° C - +120 ° C).

3. Intelligent measurement, control and safety system
•
Control system: ABB PLC, ADVANTECH upper computer, supporting the preset of cycle working conditions such as NEDC.
•
Safety protection: Overspeed (stop at 110% rated speed), over-temperature protection, dual-channel emergency stop (response ≤0.1s).

Typical Applications

SSCG180-1000-7000 Gasoline Engine Electric Dynamometer Test Bench Typical Applications

1. Engine performance development
Full-load external characteristic tests, fuel consumption rate MAP mapping, and three-effect catalytic converter conversion efficiency evaluation can be carried out.

2. Hybrid system matching
It can optimize the working point of the engine in different SOC states of HEV/PHEV and test the dynamic response of the engine during energy recovery.

3. Component verification
Tests can be conducted on fuel injection system pressure characteristics, turbocharging transient response, etc.

4. Working condition simulation
It can simulate standard cycles such as NEDC, as well as extreme conditions like 5000m altitude plateau operation and -40ºC low-temperature start-up.

Models Parameter Information

Model	Power (KW)	Torque (Nm)	Rated Speed (rpm)	Max Speed (rpm)	Torque Measurement Accuracy
SSCG30-3000/10000	30	95	3000	10000	0.2%FS
SSCG45-3000/10000	45	143	3000	10000	0.2%FS
SSCG60-3000/10000	60	191	3000	10000	0.2%FS
SSCG90-3000/10000	90	286	3000	10000	0.2%FS
SSCG110-3000/10000	110	350	3000	10000	0.2%FS
SSCG160-3000/10000	160	509	3000	10000	0.2%FS
SSCG200-3000/8000	200	637	3000	8000	0.2%FS
SSCG250-3000/8000	250	796	3000	8000	0.2%FS
SSCG300-3000/7500	300	955	3000	7500	0.2%FS
SSCG350-3000/7500	350	1114	3000	7500	0.2%FS
SSCG400-3000/7500	400	1273	3000	7500	0.2%FS
Can be customized

 

Company Profile

Intelligent Technology (Luoyang) Co., Ltd. is a high-tech enterprise specializing in equipment measurement, control, design, manufacturing and sales of power engineering systems in various fields such as aerospace, automobiles, and new energy. The company is located in the beautiful Peony Flower City - Luoyang, the capital of God.

The company always adheres to the business philosophy of "taking technological innovation as its mission and quality service as its purpose", constantly surpassing the advanced level in the same industry, integrating into the world, measuring and controlling the future, and creating high-quality products. To provide customers with products and services with high intelligence, precision, speed, reliability, and added value.

All employees of Seelong Intelligent Technology (Luoyang) Co., Ltd. warmly welcome sincere cooperation from domestic and foreign customers, and work together for the future and common development.

The main products include engine test benches, new energy power test benches, gearbox test benches and other products. Establish a complete sales service system, adhering to the business philosophy of quality for survival and service for development, to provide users with power engineering measurement and control solutions in various fields.

 

Exhibition

 

Packaging & Shipping

 FAQ

Q: What's the minimum order quantity for our cooperation?
A: We support small trail order of 1 pcs for stock products.
Q:How can I learn more about the products?
A: Please leave your email and we will send you your electronic sample book.
Q: What's your payment term?
A: Normally 40% T/T deposit, pay in full before shipment.
Q:What's the lead time for my orders?
A: Dynamometers production cycle is 6-8 weeks, sensors production cycle is 2-3 weeks, other products please contact with us.
Q: How do we get the overall solution of the test bench?
A: Leave us your email, our technical staff will communicate with you about the detailed plan.
Q: Can I come to visit your factory?
A: Sure, you are always welcomed to have a visit.